Help with Termination Power!!!

[ppuskari@magnus.acs.ohio-state.edu (Petar E Puskarich)]

Hello out there!  As many of you know, I am quite active in the 
Apple  peripheral market.   I have come across many older 20-40meg
scsi drives recently and need some information.

I have a Ramfast Rev C. and and Apple HS scsi card.  I have them
in different machines.  The problem is:   What pin does the Ramfast
send it's Scsi Termination power to????????   The Apple Scsi card
refuses to see the Miniscribe 8425s 20meggers I have for this reason.
I put the jumper across on the Ramfast and all is normal with it.
I tried to use it on a mac and sure enough it acts like the
Apple HS scsi.   


Does anyone know what line/s I should splice the +5volts into?

I have tried 26 and 38 with no avail.
CvTech kinda mentioned 24 but they were even iffy on that, (which didn't
make sense)

Thanks again for any help,  if all goes well, I will have 4 drives to
be able to off the GS and II world relatively cheaply.

Petar Puskarich
ppuskari@magnus.acs.ohio-state.edu

1/8 of the DSP assembler finished!!!!!!!  DSP coming soon.