Re: //c idea .......(BOOM, I hope not...)

[Robert Sturges <rs43+@andrew.cmu.edu>]

The Apple ][ requires +5 V @ >3 A, -5 V @ 0.1 A or so, +12 V @ 0.5 A,
and -12 V @ 0.1 A. The book says "11.8 V", but don't worry. The MBL
actually uses far less current than the ratings on the pwr supply; the
excess current is estimated for a full compliment of accessory boards.
If you use an IBM-type supply, watch out that all that power is NOT used
by your plug-ins. All that energy turns into heat, and the temperature
inside Apple case may get quite high.

Dr. Bob