Re: Problem Installing Orca/C 1.3 - Unresolved Reference Label

[stc7@cunixb.cc.columbia.edu (Steven T Chiang)]

In article <1l9urqINN5sk@gecko.cis.ohio-state.edu> vats@cis.ohio-state.edu (mudit p vats) writes:
[some stuff delete]
>
>Link Editor 1.2.3
>
>Pass 1: .........................
>Pass 2: .
>Error at 00000004 past ~_ROOT PC = 00000004 : Unresolved reference Label: ~_BWSTARTUP
>......
>Error at 00000006 past ~C_SHUTDOWN PC = 0000011B : Unresolved reference Label: ~QUIT
>.
>Error at 00000011 past ~C_STARTUP PC = 0000012F : Unresolved reference Label: ~COMMANDLINE
>
>Error at 00000015 past ~C_STARTUP PC = 00000133 : Unresolved reference Label: ~COMMANDLINE
>
>Error at 000000AF past ~C_STARTUP PC = 000001CD : Unresolved reference Label: ~QUIT
>.................
>
>5 errors found during link
>8 was the highest error level
>
>There is 1 segment, for a length of $00000B0E bytes.


	I had this problem very recently too.  As it turns out, I
re-copied the linker file back onto my HD and the problem went away.
I dunno what happened exactly, but it was fixed by recopying the
linker file.

> e-mail -> vats@magnus.acs.ohio-state.edu   Mudit P. Vats    CIS Eng  <OSU>

Steven Chiang                  Order - DreamGrafix:  The ONLY 16/256/3200
stc7@cunixb.cc.columbia.edu       color paint program for the Apple IIGS.
America On_Line:  DWS Steve
Genie:  S.Chiang4              Apple IIGS Forever!