Re: 14.4k on an Apple format

[pbauer@athena.mit.edu (Paul H Bauer)]

In article <9302021601.AA12518@chasm.scar.utoronto.ca> 90taobri@chasm.scar.utoronto.ca (Brian Tao) writes:
>The following revelation escaped cspradling@cardinal.sc107.wesleyan.edu's lips:
>> 
>> How well does Proterm 3.0 support 14.4? Well enough to justify spending
>> the extra cash? Thanks.
>
>    You should first check to see if the Digicomm Scout supports
>standard Hayes commands (probably).  You may run into problems if one of
>the standard Proterm drivers can't handle the modem.  I use a
>SupraFaxModem v.32bis which has its own PT3 driver.
>
>    Get an external modem.  I don't know of anyone around here who has
>bought an internal high-speed modem.  An external won't tie you down to
>a single system, plus status lights and other diagnostics available only
>on external models are very helpful on high-speed connections.


I have been using a ZOOM 14.4 FAX modem for several weeks now and it is 
operating very well with PT3.It also has the advantage of two non violatil
storage register which you can configure and then use as your own custom
init.

pbauer@mit.edu