Re: Help w/ IIe enhancement kit!

[sknkwrks@sonny-boy.cs.unlv.edu (Scott Alfter)]

In article <1993Jan11.222604.2498@cs.uow.edu.au> david@cs.uow.edu.au (David E A Wilson) writes:
>sknkwrks@sonny-boy.cs.unlv.edu (Scott Alfter) writes:
>>Until you find the appropriate bilingual replacement, you should be
>>able to put the US-only chip in the socket.  Make sure that pin 1 of
>>the chip matches with pin 1 of the socket...if I'm not mistaken, the
>>pin layout of the 2732 (US-only) and the 2764 (bilingual) is close
>>enough for the pins they have in common that the setup might work.
>
>WARNING.
>They are close but pin 1 does not equal pin 1. The chip goes at the other
>end of the socket (pins 1,2,27,28 are left empty).

That kind of stuff happens when you try to work from memory. :-) If
I'd thought about it, I'd've looked up some EPROM info floating around
here.

  _/_   Scott Alfter                             Internet: sknkwrks@cs.unlv.edu
 / v \  Call the Skunk Works BBS today!           Ask me about SoftDAC--digital
(IIGS(  (702) 894-9619 300-14400 V.32bis          audio for your Apple IIe/IIc!
 \_^_/  --==## "Apple II Forever" is a trademark of Apple Computer, Inc. ##==--