[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ATTENTION high-speed modem users!

Subject: Re: ATTENTION high-speed modem users!
From: mdavis@crash.cts.com (Morgan Davis)
Date: 15 Nov 92 23:12:02 GMT
Article-i.d.: crash.mdavis.721869122
Newsgroups: comp.sys.apple2
Organization: CTS Network Services (crash, ctsnet), El Cajon, CA
References: <mdavis.721637053@crash.cts.com> <guc0TB1w165w@bluemoon.use.com>

In <guc0TB1w165w@bluemoon.use.com> t_captain@bluemoon.use.com (Tc Wilson) writes:

>Yes, but you have to remember that the firmware cannot handle anthing 
>above 19200 (38400 or 57600 for the newer modems), and even then, at 
>19200, the firmware's throughput is very low (more like 11000 baud).

That's very true, which is even more reason why RTS/CTS flow control
would be an important factor.  With the inability to process high speed
input fast enough, there would be a lot of flow control going on.

References:
- Re: ATTENTION high-speed modem users!
  - From: mdavis@crash.cts.com (Morgan Davis)

Prev by Date: Re: CTS Stuff...
Next by Date: Re: ATTENTION high-speed modem users!
Previous by thread: Re: ATTENTION high-speed modem users!
Next by thread: Re: ATTENTION high-speed modem users!
Index(es):
- Date
- Thread