[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 3.5 head

Subject: Re: 3.5 head
From: bslog@pro-scat.cts.com (Bill Logsdon)
Date: 15 Nov 92 10:23:00 GMT
In-reply-to: grover@emunix.emich.edu (Grover Thomas)
Newsgroups: comp.sys.apple2
Organization: ProLine [pro-scat] St. Petersburg, Florida.
References: <1992Nov7.074117.18642@zip.eecs.umich.edu>

You don't have to bend the flange... if you have an apple 3.5 drive, the
controller alignment block on the left (if you have the drive insert slot
facing you) is adjustable.... simply slightly loosen the philips head
screw, and use a flat tip to adjust it till the drive is reading
correctly... and use several different disks, with a file verification
program, to ensure accuracy.... or you can solder leads to the checkout
points on the controller, and use an o-scope... quicker, but a REAL pain.

Follow-Ups:
- Re: 3.5 head
  - From: dsdd@okcforum.osrhe.uoknor.edu (Roy Barrett)

References:
- Re: 3.5 head
  - From: grover@emunix.emich.edu (Grover Thomas)

Prev by Date: Old question...
Next by Date: Re: ATTENTION high speed modem users: addendum to previous article
Previous by thread: Re: 3.5 head
Next by thread: Re: 3.5 head
Index(es):
- Date
- Thread