Re: Apple IIe power supply problem?

[Toinet <antoine.vignau@laposte.net>]

On 29 juin, 16:22, David Wilson <mcs6...@gmail.com> wrote:
> On Jun 29, 3:14 pm, Toinet <antoine.vig...@laposte.net> wrote:
>
> > When I turn on the IIe, the red LED is blinking and the computer does
> > not start up. Is that the signs of a power supply issue?
>
> Which Red LED blinks? There are two:
>
> CR1 Power LED
> CR2 Self Test LED
>
> CR1 blinking indicates that the power supply is detecting a problem
> and shutting down then trying to restart. If this happened to me I
> would try another PSU on that motherboard or possibly that PSU on
> another motherboard. If you don't have spares, you could try running
> the PSU with a dummy load (which you would need to construct).
>
> CR2 flashes if the self test is run (or the Bell sounds) with the
> speaker disconnected.

Thank you David,

CR1 blinks and CR2 is not lit.

I have uploaded a 7 MB video to http://www.brutal-deluxe.fr/videos/APPLEIIE.AVI
for you to see the issue ;-)

antoine