[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Cleaning old Apple II cards?
Water. Or water with some dishwashing soap, provided that you rinse
well so not to leave any residue. Use a fingernail brush and make
sure the card dries off completely before you turn it on. Anything
without a transformer on it will be fine. I've cleaned up //e and GS
mobos with the spray nozzle from my garden hose. Do a light towel dry
to remove drops and hit it with a hair dryer for a minute taking care
not to overheat the board. Then leave the card out in the sun for a
day or over a register vent (ac or heat) to let any moisture remaining
underneath IC's to evaporate.
- Paul