"]3ob" <bob [ @ ] onemanband.com> wrote in message
news:2009061510323416807-bob@onemanbandcom...
On 2009-06-15 09:43:28 -0400, "Garberstreet Electronics"
<willy46pa@comcast.net> said:
"sfahey" <sfahey@a2central.com.remove-z7x-this> wrote in message
4A35B3A8.11152.usenet_csa2@a2central.com">news:4A35B3A8.11152.usenet_csa2@a2central.com...
To: atfphotography@gmail.com
Re: Re: Show & Tell
By: atfphotography@gmail.com to comp.sys.apple2 on Sun Jun 14 2009 06:16 pm
> Do you have any good pics of just the IIe Vulcan card by itself? That
would be a killer in helping me figure out if the cards are the same
with the difference only being the ROM. No where is it listed on these
cards them- selves if they are IIgs or IIe. It just says Vulcan with a
Rev. It's only listed on the ROM.
The only difference is the ROM.
At 'U1' my GAL is marked 'HDC3A.N' and the pic on Henry's download
section has 'HDC3B.N', so, there may be something else that we're all
missing. I'm now desiring a copy of the 'HDC3B.N' GAL to find out if
this is why mine can't go beyond 20 MB no matter which ROM is in it.
I took pictures of my card (sorry they're so blurry):
http://www.onemanband.com/apple/vulcan_iie_40mb_front.jpg
http://www.onemanband.com/apple/vulcan_iie_40mb_back.jpg
They're ok, could be better, but ok. ;-)
U1 (upper left) is "HDC3B.N"
U2 (to the right of U1) is "HDC2A-N"
U13 (EEPROM) is rev "VUL1.4E/40" (could be VUL1.4F/40)...
hard to tell because of the alignment of the printing. Actually,
looking at the sticker again VERY closely, I think it's 1.4F. U16 (to
the right of U13) is "HDC1A-N".
That's 1.4E/40, as mine says 1.2GS/20. Printing is off. There, you have
a IIe version. If you can read it, I'd like a copy of the binary from
your ROM. Thanks.