Re: Q: ADT-transfers on Franklin ACE 2200 + Super Serial Card II

["Bill Garber" <willy46pa@comcast.net>]

"John B. Matthews" <nospam@nospam.invalid> wrote in message 
nospam-1428E0.12460204092008@news.motzarella.org">news:nospam-1428E0.12460204092008@news.motzarella.org...
> In article <H-6dnf-dHrQinl3VnZ2dnUVZ_h-dnZ2d@comcast.com>,
> "Bill Garber" <willy46pa@comcast.net> wrote:
> > "DeaconBlue" <locksmith64@doramail.com> wrote in 
> > message qr2dncQPsYS-ZyLVnZ2dnUVZ8judnZ2d@giganews.com">news:qr2dncQPsYS-ZyLVnZ2dnUVZ8judnZ2d@giganews.com...
> > > Hello again!
> > > 
> > > I tried with the SSC-block pointing down and 
> > > straight-through without the null-modem adapter. 
> > > This produced the same "[00]" in the terminal-program, 
> > > but no response when trying ADT.  With the null-modem 
> > > adapter no characters are transferred to terminal as 
> > > expected.
> > > 
> > > I have also tried random selection of different JP7/JP8 
> > > settings, but with no result.
>
> > For anyone else interested in how to use an SSC, 
> > here is a link to the FAQs on the subject.  ;-) 
> >
> > http://home.swbell.net/rubywand/Csa2T1TCOM.html#013 
>
> Here's some additional programming information, too:
>
> <http://home.woh.rr.com/jbmatthews/ssc.html>


And, it contains the link above that I have posted. 

Love when everything points back to everything else. 

Bill Garber from GS-Electronics
http://www.garberstreet.com