Re: Q: ADT-transfers on Franklin ACE 2200 + Super Serial Card II

["John B. Matthews" <nospam@nospam.invalid>]

In article <qNmdnRynH7UpiF3VnZ2dnUVZ_rfinZ2d@comcast.com>,
 "Bill Garber" <willy46pa@comcast.net> wrote:

> "John B. Matthews" <nospam@nospam.invalid> wrote in message 
> nospam-1428E0.12460204092008@news.motzarella.org">news:nospam-1428E0.12460204092008@news.motzarella.org...
> > In article <H-6dnf-dHrQinl3VnZ2dnUVZ_h-dnZ2d@comcast.com>,
> > "Bill Garber" <willy46pa@comcast.net> wrote:
> >>
> >> "DeaconBlue" <locksmith64@doramail.com> wrote in 
> >> message qr2dncQPsYS-ZyLVnZ2dnUVZ8judnZ2d@giganews.com">news:qr2dncQPsYS-ZyLVnZ2dnUVZ8judnZ2d@giganews.com...
> >> > Hello again!
> >> > 
> >> > I tried with the SSC-block pointing down and 
> >> > straight-through without the null-modem adapter. 
> >> > This produced the same "[00]" in the terminal-program, 
> >> > but no response when trying ADT.  With the null-modem 
> >> > adapter no characters are transferred to terminal as 
> >> > expected.
> >> > 
> >> > I have also tried random selection of different JP7/JP8 
> >> > settings, but with no result.
> > 
> >> For anyone else interested in how to use an SSC, 
> >> here is a link to the FAQs on the subject.  ;-) 
> >> 
> >> http://home.swbell.net/rubywand/Csa2T1TCOM.html#013 
> > 
> > Here's some additional programming information, too:
> > 
> > <http://home.woh.rr.com/jbmatthews/ssc.html>
>
> And, it contains the link above that I have posted. 

Thank you for providing the link I slipped in just before posting! :-) 

> Love when everything points back to everything else. 

Sweet.

I've tracked down bad cables and connectors using a VOM. Is there a way 
for the OP to see if the card itself is functional, say by storing $10 
in $C08A+slot and checking RTS (pin 4)?

-- 
John B. Matthews
trashgod at gmail dot com
home dot woh dot rr dot com slash jbmatthews