<a2aviator@gmail.com> wrote in message 7e541931-b0d7-4f12-883f-3598fd549a4d@1g2000pre.googlegroups.com">news:7e541931-b0d7-4f12-883f-3598fd549a4d@1g2000pre.googlegroups.com...
Okay, for sanity-sake, does anyone have any actual notes on the modem side of things, dip switch wise? I can't seem to find anything at all. Any modems, Apple, Hayes, USR, Zoom, etc. The switch settings they had on power up. As even an init string can not even be initially stored (AT&W) unless it communicates on power up- and in this case, the SM300 does not even support storage of an init string.
Modem Switch Settings (US Robotics) The following are the HOST modem DIP Switch settings: 1. UP � Data Terminal Ready Normal 2. UP � Verbal Result Codes 3. DOWN � Display Result Codes 4. UP � Echo Offline Commands 5. UP � Auto Answer on First Ring 6. UP � Carrier Detect Normal 7. UP � Load NVRAM Defaults 8. DOWN � Smart Mode Note: HOST refers to the modem attached to the PC where the database is installed. The following are the REMOTE modem DIP Switch settings: 1. DOWN � Data Terminal Ready Override 2. UP � Verbal Result Codes 3. DOWN � Display Result Codes 4. UP � Echo Offline Commands 5. UP � Auto Answer on First Ring 6. UP � Carrier Detect Normal 7. DOWN � Load Factory Defaults 8. DOWN � Smart Mode Note: REMOTE refers to the modem attached to the Acroprint Data Collection Terminals Here's some more. Bill Garber from GS-Electronics http://www.garberstreet.com