Re: TransWarp/RAMFast Clash

[mswaine681@aol.com]

On Jun 3, 9:28 pm, CC Rider <alask...@yahoo.com> wrote:
> Hello,
>
> When I attempt to install the RAMFast card with the TWGS in the system
> it always chokes or hangs.  I could never even get to the RAMFast
> setup screen by holding down "0" during startup.  Here are the system
> specs:
>
> Rom 03
> TWGS, with updated GALs, in slot 4
> RAMFast D, with 1 meg cache, in slot 7
> Sequential Systems 4 meg card
> AppleTalk/IRQ set to ON
> TWGS Installed set to Yes in RAMFast Options
>
> I removed the TWGS and put a stock CPU in and was able to get that to
> work.  Any suggestions on how to get the RAMFast and TWGS to play
> nice?  I did try a few different slots without success and then got
> exasperated with the whole thing.
>
> I appreciate any help.  Thank you.
>
> Clay

I have nearly the same setup:

ROM 3
stock TWGS (slot 3)
Ramfast rev D (slot 7)
Sequential Sytems 4 meg

I also have a 384 meg Focus (slot 6), a Uthernet (slot 4), a VOC (slot
5) and a Prograppler (slot 1) in there. Crowded, but everything works
great. Are you using the original power supply? I used to have
problems before I got an ATX,

MS