Re: TransWarp/RAMFast Clash

["CC Rider" <cc.rider@1:124/5009.remove-1ga-this>]

  To: mswaine681
From: CC.Rider@familynet-international.net

On Jun 3, 7:00 pm, mswaine...@aol.com wrote:
> On Jun 3, 9:28 pm, CC Rider <alask...@yahoo.com> wrote:
>
>
>
> > Hello,
>
> > When I attempt to install the RAMFast card with the TWGS in the system
> > it always chokes or hangs.  I could never even get to the RAMFast
> > setup screen by holding down "0" during startup.  Here are the system
> > specs:
>
> > Rom 03
> > TWGS, with updated GALs, in slot 4
> > RAMFast D, with 1 meg cache, in slot 7
> > Sequential Systems 4 meg card
> > AppleTalk/IRQ set to ON
> > TWGS Installed set to Yes in RAMFast Options
>
> > I removed the TWGS and put a stock CPU in and was able to get that to
> > work.  Any suggestions on how to get the RAMFast and TWGS to play
> > nice?  I did try a few different slots without success and then got
> > exasperated with the whole thing.
>
> > I appreciate any help.  Thank you.
>
> > Clay
>
> I have nearly the same setup:
>
> ROM 3
> stock TWGS (slot 3)
> Ramfast rev D (slot 7)
> Sequential Sytems 4 meg
>
> I also have a 384 meg Focus (slot 6), a Uthernet (slot 4), a VOC (slot
> 5) and a Prograppler (slot 1) in there. Crowded, but everything works
> great. Are you using the original power supply? I used to have
> problems before I got an ATX,
>
> MS

I had contemplated an upgrade.  What is your power supply setup?  Did you buy 
or build the pieces?
-+- SBBSecho 2.12-Win32
 + Origin: Derby City BBS - Louisville, KY - derbycitybbs.com (1:2320/100)

--- BBBS/NT v4.01 Flag-5
 # Origin: FamilyNet Sponsored by http://www.christian-wellness.net (8:8/2)
 * Origin: FamilyNet Echogate [972] 496-0650 (1:124/5009)
--- Synchronet 3.15a-Win32 NewsLink 1.85
 *  Derby City Online - Louisville, KY - telnet://derbycitybbs.com