a2aviator@gmail.com wrote:
What slot and ProDOS version? With ProDOS 8 2.0 or higher, you can see more than two volumes. P8 2.0 will map the volumes, two per slot, to any slot that does not contain a Disk or Smartport Device. As it's own partitions will override. There are no CMS drivers for the SCSI card. Only Apple cards and the RAMFast had native GS/OS drivers. The Sider had a GS/OS driver, but thats SASI, not SCSI. It's electrically the same, but not firmware wise. Descriptions of ProDOS versions can be found here: http://apple2.info/wiki/index.php?title=A2_DOS_ProDOS
Ahhh...No CMS drivers exist! No wonder I haven't found them (despite some comments to the contrary in the FAQ's.).
I have installed GS/OS 6.0.1 to the first partition. This includes Prodos 2.0.3 (I believe that is the latest official version). However, I'm not seeing anything but the first two 32 meg partitions.
This parallels my experience using a Ramfast (rev. D). According to the Ramfast manual, Prodos should map partitions to available slots. The manual cautions you either do it manually using the Ramfast utilities, or to let Prodos do it, but I was unable to get Prodos to map more than the two initial partitions!
Very curious! I wonder why I can't get Prodos 2.0.3 to map more than two partitions using either a Ramfast (D) or this CMS card! Do I need to set slots 6 or 4 to "your card"?
() ()
Rich ('-')