Re: CMS SCSI Card

[David Wilson <mcs6502@gmail.com>]

On May 9, 8:19 am, Rich <nos...@saddam.net> wrote:
> > There are no CMS drivers for the SCSI card. Only Apple cards and the
> > RAMFast had native GS/OS drivers.

My Cirtech SCSI cards also have native GS/OS drivers...

> Very curious!  I wonder why I can't get Prodos 2.0.3 to map more than
> two partitions using either a Ramfast (D) or this CMS card!  Do I need
> to set slots 6 or 4 to "your card"?

Does the CMS card report itself as a SmartPort card? (Cn07 == 0)

Do you have available slots without disk controllers (at worst I would
expect at least S3,D1 to be available for remapping). Leaving slot 6
set to 5.25 (not Your Card) would prevent its use by the P8 v2.0.x
remapping code).

What slot is the CMS in? If slot 5, then slot 2 remapping is available
even with P8 v1.9 as it uses the older mapping code. If not in slot 5
then drives 3..n all use the new remapping code.