Re: Testing NadaNet adapters

[schmidtd <schmidtd@my-deja.com>]

On Aug 26, 9:37 pm, "Michael J. Mahon" <mjma...@aol.com> wrote:
> schmidtd wrote:
> > On Aug 26, 1:57 pm, "Michael J. Mahon" <mjma...@aol.com> wrote:
> > I wired up another adapter and plugged it into a II+.  After doing the
> > usual chicanery to get a compatible version of ProDOS booted (and
> > inserting an 80 column card...) I got Pong working!  So, something is
> > wonky in my IIgs.
>
> Excellent!
>
> Now let's figure out what's wrong on tne IIgs side.  Rmemeber that one
> of the "no connection" pins on all other Apple II's is used on tne IIgs
> for the newly invented PB3, and that pin needs to be cut off of the
> adapter if it's used in a IIgs (though that shoudn't keep it from
> working...).
It seems to be my TransWarp.  I have another un-sped up IIgs.  I
transplanted the the adapter over there, and it works fine.  (I had
clipped the NC pin during assembly.)  So I have three known good
adapters now.  I just can't get one to work in the TransWarp'd
machine, now matter how I slow it down!

> BTW, I sent your "attglobal.net" address another message.  Did
> you receive it?

No, it's not here.  I'll send you another ID to try.

> All this stupidity about spam is beginning to interfere with normal
> communication!

And how!