Re: GS disk xfer problems :(

["Polymorph" <polymorph69@hotmail.com>]

iseign wrote:
> ADT 1.2.x doesn't work with IIgs.
> If you have IIgs and MacOSX, then I highly recommend ADTPro.
> http://adtpro.sourceforge.net
> Set ADTPro on IIgs to use IIGS MODEM port. Not SSC #2. SSC #2 on IIgs
> is little bit different from standard spec so it won't work.
> Do not use SSC #2 on IIgs but use IIGS MODEM port instead.
>
> However if you have IIc/IIc+ and Old mac, then ADT 1.2.x is the answer.
>
> iseign

iseign,

I've never encountered any problems with ADTPro using a SSC in my
IIgs?? Unless you are referring to the setup within ADTPro - ie.
selecting to use the IIgs inbuilt serial as opposed to the SSC setting?

I can happily switch between the SSC and the IIgs in-built serial port
depending upon what mood I'm in....   ;-P

cheers,
-p