Re: -Hard-Drives w/vulcan?

["Bill Garber" <willy46pa@comcast.net>]

"Michael J. Mahon" <mjmahon@aol.com> wrote in message 
vLCdnRgRptZWa-_eRVn-pg@comcast.com">news:vLCdnRgRptZWa-_eRVn-pg@comcast.com...

> Yowch!  Try switching to a monospaced font when attempting columns--
> those are pretty mangled.

Any proportional font should do it. Courier New is what I use.

> Still, the info is there...and a little disappointing, since there's a
> PAL that will make reverse engineering much harder.

PAL? a problem? and you can't write to MS-DOS disks on a IIgs
either I guess. Didn't I mention that we've already converted
PAL to GAL for the Rev"C" SCSI card? Oops, don't think so. :o)

> Chip 1 is an 'LS86 (not B6).  All pretty standard stuff except for the
> PAL, but an interesting mix of logic families!  The card must be gating
> and buffering some signals while trying to delay them as little as
> possible.

Thought that kind of looked like a B, and not 8.  :o)

> [ snipped out irrelevent info ]

Bill Garber