Re: -Hard-Drives w/vulcan?

["brad" <mrbrad(remove)@ll.net>]

"brad" <mrbrad(remove)@ll.net> wrote in message
11n63kp76k3gm53@corp.supernews.com">news:11n63kp76k3gm53@corp.supernews.com...
> crap i'll try it again...
>
> top left to right format clockwise...dip switch is upper left
> corner.....then chip 1 and 2
>
> chip 3 below dip switch and accross the board 4, 5, 6
>
> then slots
>
> anyway...see if this is clear'er (duh)
>
> brad
> mrbrad at ll dot net
>
>
> DIP SWITCH
> (all 1-5 all set to off)
>
> chip1
> P8424
> DM74LS86N
>
>
> chip 2
> 74F04 PC
> 8419 Indonesia
>
>
> chip 3
> PAL12H6CN
> 718241
>
> chip 4
> F
> 74LS175 PC
> 8040 Indonesia
>
> chip 5
> 842200
> M74ALS00AP
>  8040 Indonesia
>
> Labeled CGL Microsystems @ 1985    Rev. A
>
>
>
>

also the only chip that is set in a DIP is the PAL

all others are soldered in not sure if that means much but thought it was of
note

the size is 20 pins

brad