[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: NTSC Monitor Vs Apple IIgs' Monitor
- Subject: Re: NTSC Monitor Vs Apple IIgs' Monitor
- From: pausch@saaf.se (Paul Schlyter)
- Date: Fri, 21 Oct 2005 12:43:38 GMT
- Newsgroups: comp.sys.apple2
- Organization: Unknown
- References: <DYd5f.2056$dO2.339@newssvr29.news.prodigy.net> <lK6dncSNFoHEacreRVnzvA@telenor.com> <dja4in$2912$1@merope.saaf.se> <djacp2$elq$1@services.kq.no>
- Xref: g2news1.google.com comp.sys.apple2:6263
In article <djacp2$elq$1@services.kq.no>,
Knut <kr-lund@nogarbage.online.no> wrote:
................................
>DVD's in France and Germany are sone 2 anyway, it is compatible, if not
>completely the same.
>
>I would recommend this article by Mark P. Fishman
>http://groups.google.com/group/comp.sys.tandy/browse_thread/thread/221416fd336c4ec9/de2faf469cbe2199?lnk=st&q=color+burst+group:comp.sys.tandy&rnum=1&hl=no#de2faf469cbe2199
>
>sorry about the awful link you probably have to paste it together.
Try this link instead: http://tinyurl.com/cbn5e
:-)
>It explains why we Europeans often refers to NTSC as 'Never The Same Color'.
>What I learnt while I was searching to confirm what I thoughts is that SECAM
>is older than PAL and that PAL really is better. It is not always best to be
>first if there is room for improvement. Anyway NTSC has its points and the
>difference in quality is nowadays mostly number of lines and frame
>frequency.
>
>To write something OT too: When I changed motherboard to an NTSC in my A//e
>from PAL (to get 60Hz output from my RGB card) I wondered why there was no
>color/b&w switch.
>
>I found that it is not necessary because the composite video of NTSC has its
>Y component at full all the time and it expects the color decoding of the
>color NTSC monitor/TV to filter the Y component so you would not get
>vertical stripes.
>
>On the PAL motherboard the switch changes the signal so in color mode the Y
>component will vary and you get grayscale on a b&w monitor and in b&w mode
>you get b&w on a color monitor/TV.
>
>On the framegrabber I do get some vertical stripes on the grey "colors", it
>looks like interference so there the filtering isn't perfect (with the
>settings I have) or would this be typical for NTSC or is it a feature of my
>framegrabber? (I can't really trust my TV either because it is only an NTSC
>compatible PAL TV.)
>
>Knut
>
>
--
----------------------------------------------------------------
Paul Schlyter, Grev Turegatan 40, SE-114 38 Stockholm, SWEDEN
e-mail: pausch at stockholm dot bostream dot se
WWW: http://stjarnhimlen.se/