Re: Help installing ZIP drive

["Rudy Guy" <ljsilicon@ameritech.net>]

If you're using the Ramfast SCSI, try pressing the '0' key as you boot up. 
You should get the built-in utility software. Thie software lets you specify 
the active partitions from the drives.

Rudy

http://members.aol.com/ljsilicon


"Ziggy" <Ziggy@faked-address.com> wrote in message 
news:eH_Ue.324086$_o.108550@attbi_s71...
> Ok, i have a IIGS, and 2 scsi cards ( one ramfast, the other a regular
> AppleII SCSI ), and a 100mb SCSI zip drive..
>
> Iv'e run the advanced disk util on the floppies, but it never gives me any
> other choices then the floppy..
>
> Is there something else i need to do to get the zip hardware to be seen? I
> thought i just plugged in a card, and booted off GS/OS and it took care of
> the rest?
>
> The last time i did this was many many years ago, and it was a *real* hard
> drive, and i dont remember doing anything special.. ( hard drive is long
> gone now anyway and all i have is one apple 3.5" drive )
>
>
>
>