Re: Help installing ZIP drive

[Ziggy <Ziggy@faked-address.com>]

Terry Olsen wrote:

> I don't know about the Apple SCSI card, but I have a Zip hooked up to my
> RamFAST.  I just used the ramfast utils to format it.  Maybe in GSOS you
> have to use advanced disk utils to partition the thing?
> 
> 
> "Ziggy" <Ziggy@faked-address.com> wrote in message
> news:eH_Ue.324086$_o.108550@attbi_s71...
>> Ok, i have a IIGS, and 2 scsi cards ( one ramfast, the other a regular
>> AppleII SCSI ), and a 100mb SCSI zip drive..
>>
>> Iv'e run the advanced disk util on the floppies, but it never gives me
>> any other choices then the floppy..
>>
>> Is there something else i need to do to get the zip hardware to be seen?
>> I thought i just plugged in a card, and booted off GS/OS and it took care
>> of the rest?
>>
>> The last time i did this was many many years ago, and it was a *real*
>> hard drive, and i dont remember doing anything special.. ( hard drive is
>> long gone now anyway and all i have is one apple 3.5" drive )
>>
>>
>>
>>

I dont have ramfast utils on a disk... Another guy suggested hitting 0 when
i power up to get the on board utils, but no dice :(

I did try the advanced utils in GS/OS before i posted, but it only sees the
floppy drive. ( tried both cards )