ProTERM 3.1 to PC via Hyperterminal

[citaria@hotmail.com (Kellion)]

Hello all,
     I have a very strange problem I have been playing with for a
while here.  I am trying to do "Null Modem" transfers via my PC with
Hypertermain to my Apple //e with ProTERM 3.1

I have ADT working just fine with the SSC settings for that and even
ProTerm 2.0 works well.  Just can't seem to get ProTERM 3.1 up and
rolling.  I set up
a "system" in ProTerm called "LOCAL", 9600, and no phone number.  On
the PC side, I open the COM1 port and on the Apple //e side I tell
ProTERM to Dial.  ProTERM sees the connection and if I send characters
from the PC to the Apple //e REALLY SLOW.  They show up, but anything
faster and it prints the first character and nothing else (once in a
while it'll print an extra character I sent.)

Example:

  PC sends: TESTING123

  ProTerm shows: T

I have tried this at just about any baud rate (300,1200,9600)


  PC sends: TESTING123TESTING123

  ProTerm shows: TT2T


I am certain the connection is working as it works fine with ADT and
ProTerm 2.0.  Very strange.

Any insight would be appreciated.

Kellion...