Re: ProTERM 3.1 to PC via Hyperterminal

["Laine Houghton" <laine@intergate.com>]

"Kellion" <citaria@hotmail.com> wrote in message
b8c7bc2e.0410011849.296397b1@posting.google.com">news:b8c7bc2e.0410011849.296397b1@posting.google.com...
> Hello all,
>      I have a very strange problem I have been playing with for a
> while here.  I am trying to do "Null Modem" transfers via my PC with
> Hypertermain to my Apple //e with ProTERM 3.1
>
> I have ADT working just fine with the SSC settings for that and even
> ProTerm 2.0 works well.  Just can't seem to get ProTERM 3.1 up and
> rolling.  I set up
> a "system" in ProTerm called "LOCAL", 9600, and no phone number.  On
> the PC side, I open the COM1 port and on the Apple //e side I tell
> ProTERM to Dial.  ProTERM sees the connection and if I send characters
> from the PC to the Apple //e REALLY SLOW.  They show up, but anything
> faster and it prints the first character and nothing else (once in a
> while it'll print an extra character I sent.)
>
> Example:
>
>   PC sends: TESTING123
>
>   ProTerm shows: T
>
> I have tried this at just about any baud rate (300,1200,9600)
>
>
>   PC sends: TESTING123TESTING123
>
>   ProTerm shows: TT2T
>
>
> I am certain the connection is working as it works fine with ADT and
> ProTerm 2.0.  Very strange.
>
> Any insight would be appreciated.
>
> Kellion...

Just want to make sure you are using the null modem driver.