Re: Apple //c + //e Joystick

[Sean McNamara <sean@macassist.com.au>]

In article <20040825180629.15071.00002262@mb-m02.aol.com>,
 mjmahon@aol.com (Michael J. Mahon) wrote:

> Those are the correct pinouts, so it's either the soldering or the
> joystick that is the problem.

Thanks for casting your eye over my pinouts, Michael - given the 
joystick is working fine on the internal I/O connector, and given my 
limited soldering skills, I'll go with me needing to resolder :) ::adds 
resolder joystick adaptor to Apple ][ ToDo list::

I was hoping to be able to use the joystick with my IIe LC card and 
externally on my //e - I'm also thinking of making a cable to 
externalise my europlus' I/O connector. I think these can be bought, but 
my budget's tight at the moment and there's not much of that sort of 
stuff out here in Oz.

Sean

------------------------------------------------------------------------
Sean McNamara                               mailto:sean@macassist.com.au
MacAssist                                             Ph: (02) 8920 0866
Authorised Apple Solutions Reseller                  Fax: (02) 8920 0877
ABN 95 758 412 281                                  Mobile: 0414 270 132