Re: Apple //c + //e Joystick

["John Van Winkle" <appleiieman@charter.net>]

I have one of those ribbon cables that will plug in to the socket that is
factory made.  If interested, email me.  I cna even send you a pic through
the mail.

John Van Winkle

appleiieman@charter.net



"Sean McNamara" <sean@macassist.com.au> wrote in message
sean-2C7F8B.09540026082004@news-server.bigpond.net.au">news:sean-2C7F8B.09540026082004@news-server.bigpond.net.au...
> In article <20040825180629.15071.00002262@mb-m02.aol.com>,
>  mjmahon@aol.com (Michael J. Mahon) wrote:
>
> > Those are the correct pinouts, so it's either the soldering or the
> > joystick that is the problem.
>
> Thanks for casting your eye over my pinouts, Michael - given the
> joystick is working fine on the internal I/O connector, and given my
> limited soldering skills, I'll go with me needing to resolder :) ::adds
> resolder joystick adaptor to Apple ][ ToDo list::
>
> I was hoping to be able to use the joystick with my IIe LC card and
> externally on my //e - I'm also thinking of making a cable to
> externalise my europlus' I/O connector. I think these can be bought, but
> my budget's tight at the moment and there's not much of that sort of
> stuff out here in Oz.
>
> Sean
>
> ------------------------------------------------------------------------
> Sean McNamara                               mailto:sean@macassist.com.au
> MacAssist                                             Ph: (02) 8920 0866
> Authorised Apple Solutions Reseller                  Fax: (02) 8920 0877
> ABN 95 758 412 281                                  Mobile: 0414 270 132