[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ADT Transfer failure
- Subject: Re: ADT Transfer failure
- From: Paul Guertin <pg@sff.net>
- Date: Sun, 20 Jun 2004 22:40:04 -0400
- Newsgroups: comp.sys.apple2
- Organization: Amalgamated Karma
- References: <uDnBc.86530$Sw.84311@attbi_s51>
- Reply-to: pg@sff.net
- Xref: g2news1.google.com comp.sys.apple2:1294
On Sun, 20 Jun 2004 21:49:14 GMT, "Josiah" <com.yahoo@chibivash81> wrote:
> However, if I try to transfer an Apple II *.dsk file -to- the Apple II, ADT
> attempts to read the disk it will be writing to and returns the error "not a
> 16-sector disk". I tried formatting/INITing it ("INIT HELLO") and then
> trying again but I just get the same error. The version of ADT on the Apple
> II I'm using is 1.21
ADT uses RWTS to read track 1, sector 1 to make sure that the
disk is formatted. Use Copy II Plus or a similar program to confirm
that your formatted disk is readable (Verify disk in Copy II Plus).
Make sure you are using ADT under standard DOS 3.3. If it still doesn't
work, re-upload ADT to your Apple II. Good luck.
Paul Guertin
pg@sff.net