[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: About //c plus
- Subject: Re: About //c plus
- From: Raymond Wiker <Raymond.Wiker@fast.no>
- Date: Mon, 07 Jun 2004 19:29:56 +0200
- Cancel-lock: sha1:tZHfBqyAGwVgchqcB6OnzhnF100=
- Newsgroups: comp.sys.apple2
- Organization: Broadnet Norge AS
- References: <BCE9D504.646B%speak&spam@msn.it> <868yezvosx.fsf@raw.grenland.fast.no> <BCEA692F.647E%speak&spam@msn.it>
- User-agent: Gnus/5.1006 (Gnus v5.10.6) XEmacs/21.4 (Portable Code, berkeley-unix)
- Xref: g2news1.google.com comp.sys.apple2:1003
CyberDez <speak&spam@msn.it> writes:
> On 7-06-2004 8:56, in article 868yezvosx.fsf@raw.grenland.fast.no, "Raymond
> Wiker" <Raymond.Wiker@fast.no> wrote:
>
>> The //c+ power supply is 110 V only, so you'll need a
>> step-down transformer or something similar. I've had a //c+ for two or
>> three years now, and sometime this week I'll finally get a step-down
>> transformer for it. Good thing that I have other computers to play
>> with :-)
>
> Thanks a lot. I know it's an outdated question but... Do you ever opened the
> //c plus internal PSU to see if a 220V modification was possible?
> The step-down transformer is something I'd like to keep as last resource but
> luckily mostly (if not all) PSUs are quite insensitive if the voltage
> frequency is 50 or 60Hz... :-)
I did open the PSU, but I couldn't see any obvious way of
using it with 220V (like, say, a switch marked 110/220 V :-)
I also checked Apple's support pages, and they, too,
indicated that the PSU is 110V only.
If you find a way of modifying the PSU, I'd be very interested
to hear about it.
--
Raymond Wiker Mail: Raymond.Wiker@fast.no
Senior Software Engineer Web: http://www.fast.no/
Fast Search & Transfer ASA Phone: +47 23 01 11 60
P.O. Box 1677 Vika Fax: +47 35 54 87 99
NO-0120 Oslo, NORWAY Mob: +47 48 01 11 60
Try FAST Search: http://alltheweb.com/