Re: RR-Net (Was: Porting the TFE)

["Glenn Jones" <rg.jones@rogers.com>]

"MagerValp" <MagerValp@cling.gu.se> wrote in message
p14d67sx0xw.fsf_-_@panini.cling.gu.se">news:p14d67sx0xw.fsf_-_@panini.cling.gu.se...
<snip>
>
> It'd be even cheaper and easier to make an A1200 clock port card. This
> would allow you to connect Silver Surfer (16C550) and RR-Net (CS8900A)
> modules from www.jschoenfeld.de. They cost EUR 30 and EUR 50 respec-
> tively. Though as you still need to make your own PCBs, you might as
> well incorporate the CS8900A straight on the board.
>   Regarding TCP/IP code, I'm working on a small stack in 6502 asm:
>
>   http://www.paradroid.net/ip65/
>
> I'm writing it for the C64, but the code is portable. Only two files
> would need to be changed to run it on an Apple II. As the diagram
> shows I've got most of the basic architecture done, TCP is the only
> major piece of work that's left.
>
> -- 
>     ___          .     .  .         .       . +  .         .      o
>   _|___|_   +   .  +     .     +         .  Per Olofsson, arkadspelare
>     o-o    .      .     .   o         +          MagerValp@cling.gu.se
>      -       +            +    .     http://www.cling.gu.se/~cl3polof/

Mager,

are you porting uIP to 6502 or ??


-- 
Personal Website: http://members.rogers.com/rg.jones/
Apple Specific Website http://members.rogers.com/apple2stuff/apple.htm
Email: Reply to apple2stuff at rogers dot com