Re: 5.25" drive & FocusDrive

[dalloff@gcfn.org (Dave Althoff Jr)]

Michael Maginnis (michaelmaginnis@yahoo.com) wrote:
: Since I mentioned this in a previous post, it's eating at me and I have 
: to know.  I have a FocusDrive mounted in my IIgs in Slot 6 (set to "Your 
: Card") and start up is set to that slot as well.  I also have 2 3.5" 
: drives daisy chained into the Smart Port - if I want to add a 5.25" 
: drive to the end of chain, do I have to make any changes to the current 
: setup (other than plugging the drive in, obviously)?  I seem to recall 
: reading somewhere that a IIgs will automatically try to boot from a 
: 5.25" drive if it finds one attached.

Put your Focus in Slot 7, chain the floppies off the SmartPort, and you'll
have Focus in 7, 5.25 in 6, and 3.5 in 5.  

If you have a ROM 01 and you are using AppleTalk, put the Focus in Slot 1
(if you are AppleTalking over the printer port) or Slot 2 (if you are
AppleTaking over the modem port) and set your startup slot to wherever you
put the Focus unless you want to boot from the floppies.

If you have a ROM 03, put the Focus in Slot 7.

If you want to switch off which drive you boot from, find a program called
ProBoot...I want to say it's one of Sheppy's creations but I am not sure
right now.  I tried it, but discovered that if I really wanted to boot
from a floppy it was just as easy to hit RESET a couple of times and do a
PR#n.

--Dave Althoff, ][.
-- 
    /X\        _       _               *** Closed for the season. ***
   /XXX\      /X\     /X\_      _     /X\__      _     _        _____
  /XXXXX\    /XXX\  _/XXXX\_   /X\   /XXXXX\    /X\   /X\      /XXXXX
_/XXXXXXX\__/XXXXX\/XXXXXXXX\_/XXX\_/XXXXXXX\__/XXX\_/XXX\_/\_/XXXXXX