Re: ROM 01 IIgs slot asssignments

["Bill Garber" <willy46pa@comcast.net>]

"Bill Garber" <willy46pa@comcast.net> wrote in message
jt2dnQr0dKUotqzd4p2dnA@comcast.com">news:jt2dnQr0dKUotqzd4p2dnA@comcast.com...
:
: "Simon Williams" <spam@luddite.ca> wrote in message
: 1g98y8n.1kzykal13zws42N%spam@luddite.ca">news:1g98y8n.1kzykal13zws42N%spam@luddite.ca...
: : Rubywand <rubywand@swbell.net> wrote:
: :
: : > Usually, you can afford to have Slot 2 set to "Your Card"
on
: a IIgs.
: : > Since modern telecom software (like Spectrum, ProTerm, and
: Modem MGR) does
: : > not use the Slot 2 firmware, you can retain modem and NULL
: modem connections
: : > without Slot 2 being set to "Modem".
: :
: : That sounds like a workable solution... now if I can only
find
: my
: : MicroDrive manual and figure out the switch settings... :)
:
: That is easy Simon. Switches are binary with OFF meaning
: a "1" and ON meaning "0". Slot 2 would then be
:
: Switch 4 = XXX
: Switch 3 = ON
: Switch 2 = OFF
: Switch 1 = ON
: Hence, XXX, ON, OFF, ON
: or      X,   0,  1,   0  = 2

I have also added the switch setting chart to the
downloads page of my web site.  8-)

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/04