[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Some IIgs questions



"Michael Maginnis" <michaelmaginnis@yahoo.com> wrote in message
20ed765a.0401280711.1c629345@posting.google.com">news:20ed765a.0401280711.1c629345@posting.google.com...
: "Stephen Hartz" <SHartz@columbus.rr.com> wrote in message
news:<_%FRb.46667$DE.9311@fe2.columbus.rr.com>...
: > Mike, I would first try to run diagnostic programs on the
Transwarp and the
: > Sirus.  Could be a hardware problem...
:
: Ran the Transwarp diagnostic last night - came up clean, so
maybe
: that's not it.  Haven't found a Sirius diagnostic, though I'm
sure
: there's one out there somewhere.

I have the Sirius Diag disk. I can ShrinkIt and send.
I will need a valid email address to send to, so you
can email me. The header address works. I don't munge
that one. ;-)

: > Do you have the NEC drivers installed?  I believe they are
available. Maybe
: > others here can tell you where...
:
: I found a copy of the NEC drivers in a folder containing Sirius
: utilities on the FocusDrive - these are the drivers I currently
have
: installed.

You also need the CDROM drivers under GS/OS installed.
I see that no one has bothered to ask you that yet.
They are on the GS/OS installation disks. Just run
installer, choose the volume with GS/OS installed
on it, and then find the scripts you need on the
list in the box on the left and click install. If you
don't have these installed, then "no" CD drive will
work.

: See my responses to Jeff and Bill about the various configs
I've tried
: (don't want to waste bandwidth listing them a third time).  By
"first
: device", so you mean the Apple HS SCSI card itself?  I thought
it
: provided it's own termination at that end.  Device ID's: Zip 5,
NEC 3.

Mike, I will try to impress this once more. Without
the diode mod the Apple SCSI cards do not supply
termination power, unless you have an active terminator
at the Apple side connector. Do the mod and it will
work, I promise. ;-) Your IDs are fine. Your setup
is good. Check for a diode. The procedure for the mod
is on my site which is listed below. Check it out on
the downloads page.

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.566 / Virus Database: 357 - Release Date: 1/22/04