Re: WaZaBoo! May be down for a while

["Bill Garber" <willy46pa@comcast.net>]

"dj_lx" <dj_lx1@earthlink.net> wrote in message 8a6c6b9f.0312241313.53a2ea60@posting.google.com">news:8a6c6b9f.0312241313.53a2ea60@posting.google.com...
: I have a problem with the RamFAST V.3.00h.    I unplugged one modem
: and plugged in another while the GS was still on. Now Everytime I boot
: the GS the hard drive spins with the little light on and Ram FAST
: tries to scan the hard drive but the little light spins too. I have
: tried pressing "0" for the RamFAST menu and then scan for the hard
: drive but that doesn't work, either. I have tried taking out the
: RamFAST card and booting that way then replacing the RamFAST card with
: no luck either. Does anyone know how to fix this?
: 
: Alexey

There is no way to be sure, but I doubt that 
unplugging a serial cable would have an effect 
on the operation of the SCSI card. Did you check 
to be sure that your battery didn't die and make
the slots revert to default status? I had a RamFast 
SCSI with 3.00H ROM and I sold it because I couldn't 
get it to work right in my ROM-3 IIgs. I recently 
picked up a High Speed SCSI card, but haven't used 
it as yet. I'm still trying to get reorganized here. 
Anyway, try resetting your control panel to default, 
running the system, and then only install the SCSI 
card and drive. Then if all is well there, begin 
to install the rest of your system. Can't think 
of anything else to do. 

Bill @ GarberStreet Enterprizez };-) 
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.544 / Virus Database: 338 - Release Date: 11/25/03