Re: WaZaBoo! May be down for a while

[dj_lx1@earthlink.net (dj_lx)]

"Bill Garber" <willy46pa@comcast.net> wrote in message news:<NfednZwT_McssHeiRVn-ug@comcast.com>...
> "dj lx" <dj lx1@earthlink.net> wrote in message 
> 8a6c6b9f.0312241313.53a2ea60@posting.google.com">news:8a6c6b9f.0312241313.53a2ea60@posting.google.com...
> : I have a problem with the RamFAST V.3.00h.    I unplugged one modem
> : and plugged in another while the GS was still on. Now Everytime I boot
> : the GS the hard drive spins with the little light on and Ram FAST
> : tries to scan the hard drive but the little light spins too. I have
> : tried pressing "0" for the RamFAST menu and then scan for the hard
> : drive but that doesn't work, either. I have tried taking out the
> : RamFAST card and booting that way then replacing the RamFAST card with
> : no luck either. Does anyone know how to fix this?
> : 
> : Alexey
> 
> There is no way to be sure, but I doubt that 
> unplugging a serial cable would have an effect 
> on the operation of the SCSI card. Did you check 
> to be sure that your battery didn't die and make
> the slots revert to default status? I had a RamFast 
> SCSI with 3.00H ROM and I sold it because I couldn't 
> get it to work right in my ROM-3 IIgs. I recently 
> picked up a High Speed SCSI card, but haven't used 
> it as yet. I'm still trying to get reorganized here. 
> Anyway, try resetting your control panel to default, 
> running the system, and then only install the SCSI 
> card and drive. Then if all is well there, begin 
> to install the rest of your system. Can't think 
> of anything else to do. 
> 
> Bill @ GarberStreet Enterprizez };-) 
> Web Site - http://garberstreet.netfirms.com
> Email - willy4SPAM6pa@comXcast.net
> Remove - SPAM and X to contact me
> 
> 
> 
> ---
> This email ain't infected, dude!
> 
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.544 / Virus Database: 338 - Release Date: 11/25/03



NO the control panel is normal, slot 7 for "Your card" and everything
else is ok. The battery didn't die, I think. I did try ProSEL off of a
flopy and got a response that said "Unable to load ProDOS. When I
first got the GS out of the attic it was cold and did the same thing,
drive spinning and extra light on. Then after about 20 tries it
booted. I am looking into IBM PC BBS's maybe I can get that to work.
My boss at work is buying me a new computer, probobly with speakers,
and a fast one, I own music software so I can make music. I will use
the old comp0uter to run a PC BBS, if I can't get the GS to work.

Alexey