Re: Need info on A2 card

["Peter Ibbotson" <spambox@ibbotson.demon.co.uk>]

"Bill Garber" <willy4SPAM6pa@comXcast.net> wrote in message
H7CdnUbeR7-zcBCiRVn-hg@comcast.com">news:H7CdnUbeR7-zcBCiRVn-hg@comcast.com...
>
> "Glenn Jones" <rg.jones@rogers.com> wrote in message
> news:PVljb.119679$ko%.113652@news04.bloor.is.net.cable.rogers.com...
> >
> > "Bill Garber" <willy4SPAM6pa@comXcast.net> wrote in message
> > 4qOdnQRXv78yexCiRVn-jw@comcast.com">news:4qOdnQRXv78yexCiRVn-jw@comcast.com...
> > >
> > > I know I've probably asked this before, but if anyone
> > > has the pinout for the DB25 port connector on a Profile
> > > interface (Apple II interface) card, I would appreciate it.
> >
> > Bill, the profile drive was compatible with the Apple III and Lisa. this
> is
> > the spec of the parallel port on the Lisa - taken from
> > http://www.crazychucks.com/Lisa/GOODTHINGS.PDF pg 141
> >
> > Hope this helps
>
> It might be the same pinout, but this is an interface card with
> "Apple II Interface" marked right on it. If you can email me
> with a valid address I'll scan both sides of the card and send
> the pics to you.


I have the manual (and the drive plus cards) at home. I can have a quick
look and see if it's got any info for you Bill.

-- 
Work peteri@lakeview.co.uk.plugh.org | remove magic word .org to reply
Home peter@ibbotson.co.uk.plugh.org  | I own the domain but theres no MX