Re: An LCD for your IIGS?

[Ed Eastman <noone@nowhere.net>]

Cofirm this is what I was referring to:
IIgs --> Mac to VGA adapter --> VGA to component adapter --> Display

After doing some research, looks like the there are multiple definitions 
of component video these days.  There is the RGB and two mixing schemes 
similar to Svideo.  The projector I used had component inpuits that 
accepted RGB and synched down to 15kHz.  The cable was almost a direct 
feed with wiring and a little impedence matching inductors to ensure 
good video quality.

If you want the S-Video type component out, you will need an adapter to 
mix the signals.  Again, myu set-up was almost strait through.  (Ever 
play Sobotage on an 8 foot screen?)

Michael J. Mahon wrote:
> BTW, I have never seen such a VGA-to-component cable.  Where
> are these obtainable?

For example, you may find one here for $200 here...
http://www.ramelectronics.net/html/kd-vtca2.htm

Thankx,
Ed