Re: Clock Card?

["Bill Garber" <willy46pa@comcast.net>]

"Wayne Stewart" <waynes@telus.dotnet> wrote in message
news:PD6ab.35008$Cu3.15686@edtnps84...
>
> Bill Garber wrote:
> > Another and I have determined that this is some form
> > of clock card. It has "IDS" formed into the face of the
> > card using the trace material but that part is not connected
> > to any of the real and actual traces. I have 2 of these cards
> > and would like to use one or both. If anyone has one of these
> > and has software to configure it, or would like to accept one
> > for study and possibly engineer some software for use with it,
> > I would be happy to allow them to keep the card as payment
> > for doing so. A layout of the card is available at the link below.
>
> Have you tried typing PR#x where x is the slot the card is in?
>
> Wayne

Yes, I did. I tried ProDOS users.disk and it claims there is no
time or date. I tried reading the eprom, however I am not sure
if I should read C400 or CC00. They don't display the same
info. It is a 2764 which is I believe 8k so I'm not sure how that
would read since $100 is all that will fit in the slot memory.
How do I find out where the firmware is loading into RAM?
You would think just about any clock software would find it.
ThunderClock software searches the slots, finds none. NSC
looks for it and finds none of course since it isn't looking in a
slot at all. ProDOS seems to find nothing. I don't know what to
try next.

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy46pa@comcast.net



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.515 / Virus Database: 313 - Release Date: 9/1/03