Re: IIe -> mac data transfer

["Sheldon Simms" <sheldonsimms@yahoo.com>]

On Fri, 27 Jun 2003 04:13:54 +0000, Quartz wrote:

>> The chips are, the 273 is the chip removed from the RamWorks where the
>> cable from the 816 plugs in. No idea what it does. The other larger chip
>> is a 65C02 which was removed from the motherboard to allow the insertion
>> of the 816 upgrade board. I would assume unless that 816 is going to be
>> removed that they are no longer needed, but saved in the case that it might
>> be.
> 
> so basically they're the old parts that were swapped out to make room 
> for what's currently in there, right?
> 
> are any of these worth anything on their own, or shoudl I just sell them 
> with the lot?

I would suggest you put the 65C02 back in the motherboard when you remove
the 816 card. You should also probably take the MMU chip out of the 816
card and put it back in the motherboard too. You can look at that manual
I gave the link to (or find a copy lying aroung there) and follow the
installation instructions in reverse. The 74LS273 chip should stay with
the Ramworks setup.

-Sheldon