Re: Mockingboard A to Apple speaker?

[Rubywand <rubywand@swbell.net>]

"Michael J. Mahon" writes ...
> 
> Rubywand wrote:
> 
> <nice circuit modification snipped>
> 
> >Make a small non-polarized electrolytic capacitor by connecting
> >the negative ends of a couple 5uF caps. One of the + ends goes to
> >the 1000 Ohm resistor.
> 
> Since the Apple II speaker output is unipolar (always positive
> relative to ground), it should be quite safe to use a regular
> polarized electrolytic, with the "+" side toward the Apple II
> speaker side.
> 
 ....

     Thanks for the info, Michael. That will make the circuit
easier to build.


Rubywand