[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ADT Disk Problem
- Subject: Re: ADT Disk Problem
- From: "Bill Garber" <willy46pa@comcast.net>
- Date: Fri, 16 May 2003 00:41:42 -0400
- Newsgroups: comp.sys.apple2
- References: <9jXwa.20225$6P6.467747@twister.socal.rr.com>
- Xref: archiver1.google.com comp.sys.apple2:30516
> I've successfully dumped Dos 3.3 onto a disk, as well as ADT (using
> hyperterminal). Whenever I try to transfer a disk image such as prodos or
> zlink, ADT always hangs at track 6, sector F, giving me a BAD CRC message.
> This happens to ALL my disks.
>
> Any suggestions?
> PS- I formatted all my blank disks using the INIT HELLO command. Should I
> format some other way?
Ok, the problem is, you are attempting to write a ProDOS image to a DOS 3.3
disk. That's a no go. You will have to get a ProDOS image to the machine
some
other way. I believe there may be a dump of ProDOS somewhere also, but I'm
not
sure where mine is. I have Apple stuff planted everywhere and in every
format
imaginable. If I find the zip file with that in it, I'll put it on my site
and you can
grab it. ;-) Perhaps someone else will get you the help you need first.
Sorry I don't
have it right at hand.
Bill @ GarberStreet Enterprises
http://garberstreet.netfirms.com
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.478 / Virus Database: 275 - Release Date: 5/6/03