[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ADT Disk Problem
- Subject: Re: ADT Disk Problem
- From: willi@wilserv.com (Willi Kusche)
- Date: 15 May 2003 22:03:14 -0700
- Newsgroups: comp.sys.apple2
- Organization: http://groups.google.com/
- References: <9jXwa.20225$6P6.467747@twister.socal.rr.com>
- Xref: archiver1.google.com comp.sys.apple2:30517
Hi!
"pszBob" <pszBob@[DONTSENDSPAM]hotmail.com> wrote in message news:<9jXwa.20225$6P6.467747@twister.socal.rr.com>...
> I've successfully dumped Dos 3.3 onto a disk, as well as ADT (using
> hyperterminal). Whenever I try to transfer a disk image such as prodos or
> zlink, ADT always hangs at track 6, sector F, giving me a BAD CRC message.
> This happens to ALL my disks.
> Any suggestions?
> pszBob (no, my name is not Bob)
> PS- I formatted all my blank disks using the INIT HELLO command. Should I
> format some other way?
OK on the formatting. You might want to use the program that's
available on the Ground site that validates various versions of ADT.
ADT reads and writes 7 tracks at a time so it's interesting that you
get a hang at the end of the seventh track (0 to 6 is seven).
Willi