[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Eject button on an Apple 3.5 Drive
- Subject: Eject button on an Apple 3.5 Drive
- From: "Bryan Villados" <news003@macgeek.org>
- Date: Tue, 15 Apr 2003 08:42:14 GMT
- Newsgroups: comp.sys.apple2
- Organization: RoadRunner - West
- Xref: archiver1.google.com comp.sys.apple2:29702
Hi, guys!
I'm currently making plans to build a custom case for an Apple IIGS. The
Apple 3.5 drive is going to be internal, and I'm using the Apple IIc+'s
internal drive and housing for this project. On this housing, there is an
eject button with a red/black connector that normally connects to the IIc+'s
logic board. From what I understand about the "external" version of the
Apple 3.5 drive, the eject button signal travels along one or two of the
20-pins on the ribbon connector. If that is true, which two pins on the
ribbon connector do I connect the red/black wires so I can make the eject
button work?
Thanks! :)
--- Bryan