Re: Cannot get ADT to work

["Albert D. Kallal" <kallal@msn.com>]

You sure you serial cable is ok?

did you try flipping jumper cube thing on the serial card?

It has been several years since I have dropped by this newsgroup. Or in fact
pulled out my old appleII with a serial card. However, it did work for me.

You might also want to check the serial port settings on the windows side in
the control panel.

--
Albert D. Kallal
Edmonton,  Alberta Canada
kallal@msn.com
http://www.attcanada.net/~kallal.msn



"Ivan" <ivanf@aintegra.com> wrote in message
v8b3cofjdjhu01@corp.supernews.com">news:v8b3cofjdjhu01@corp.supernews.com...
> Greetings,
>
> I have an Apple 2e (enhanced) with an apple Super Serial Card II
(670-8020B)
> and a null modem cable.  I downloaded ADT and followed the instructions
but
> I cannot get the PCs (tried 2 different ones) and the Apple to talk.  I
get
> garbage in the hyperterm window when I type on the Apple and nothing on
the
> Apple when I type on the PC.  I can't get them ADT.dmp file over to the
> Apple.
>
> I've tried different baud rates and such but it's always garbage and only
in
> one direction, nothing ever appears on the Apple screen.  I suspect that I
> have a defective SSC-2 but I only have the one to use.  Is there something
I
> am doing wrong or has anyone else seen this problem?  Any help is much
> appreciated, thanks
>
> Ivan
>
>