[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
scsi hard disk for IIe
- Subject: scsi hard disk for IIe
- From: "Allen Bong" <sfbong@tm.net.my>
- Date: Wed, 26 Feb 2003 09:02:19 +0800
- Newsgroups: comp.sys.apple2
- Organization: TMnet Malaysia
- Xref: archiver1.google.com comp.sys.apple2:27827
Hi,
I bought a scsi enclosure (cheap) and mounted my 700MB Quantum drive into
it. From the back of the enclosure there is a 5-pin plug with 4 wires on it
which I can't find a place to plug in on my HD. It is for the address
selection switch connected to a thumbwheel switch with 2 buttons on it.
Anyone know how I am going to connect this cable. Can I just solder the
wires to the 6-pin jumper block A0,A1,A2 directly and anyone know which
wire goes to where?
If my drive is terminated internally. Do I need to put a terminator on the
other CN50 socket outsoide the enclosure?
Allen
--
The next war will determine NOT who is right BUT what is left.