Re: Need modem advice

["GarberStreet Enterprises" <willy46pa@comcast.net>]

Simon,

Here is the actual init string that will work with that modem.

ATZ^M~~~AT S7=45 S0=0 V1 X4^M~

The wavy things are shift-` the key next to the one key.
There are 3 after the 1st M and one after the last M.
The proper switch settings are:
1, 2, 4 and 6 - up,  all others down.
This should get you rolling. Also be sure not to set the
modem port to more than 19,200.

Bill @ GarberStreet Enterprises
http://garberstreet.netfirms.com


Simon Williams <*email*@*luddite.ca*> wrote in message
24216.JCGMDBWE@news.telusplanet.net">news:24216.JCGMDBWE@news.telusplanet.net...
> I'm trying to get a modem working on my GS with ProTERM, but have no
> experience with the intricacies of this procedure... I have the ProTERM
> diskette, a new high speed modem cable and two modems -- a USR Sportster
> 28.8 Fax Modem and a GVC V.34 28.8 Fax Modem. I'm using the GS's built-
> in modem port, presuming that PT overrides the control panel settings
> for the port (right?).
> So far I've tried about 8 million different init strings with both
> modems but to no avail... I can see their little lights flashing like
> they're good to go, but then PT says 'can't init the modem'
> Is it possible that I need to find an older/slower modem?
>
> --
> Simon Williams
> Luddite Enterprises
> http://www.luddite.ca


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.449 / Virus Database: 251 - Release Date: 1/27/03