Re: Problem with ADT transfer WIN XP -> Apple II+

[wrodiger@attbi.com (wrodiger)]

skemper@tampabay.rr.com (Steve Kemper) wrote in message news:<b7003f55.0302031550.7a6aaeb0@posting.google.com>...
> The program on the Apple is probably corrupt.  I would try resending
> it.  Use Hyperterminal and be sure to set a 1000 millisecond line (not
> character) delay.  If you don't set the line delay then the program
> could easily become corrupt.  It takes a little longer to transfer
> that way but it's nothing compared to the hours wasted working with a
> corrupt program.
> 
> Good Luck,
> Steve

Thanks, I have tried running under dos as well as running adt122 for
windows, both with the same results. Also I did download the Apple II
side program again with 1.2 second end of line delay. This also gave
same results.

The only other thing I can think of is this: I am using the SSC which
supports both modem and terminal mode via a jumper that gets switched
for each mode. I am currently using a straight through cable in
terminal mode. This works correctly for transferring text via
hyperterm -> IN#2.

However, do you think this could be somehow transforming the data
because it is in terminal mode? Should I find a null modem cable and
try in modem mode?

The other odd thing is that the CRC error is reported on the PC side
(the sender) as if the image it is reading is bad. I have tried many
images with the same results.

Thanks,
Will