Re: Problem with Apple II 3.5 Disk Controller Card on Apple IIe

[Rubywand <rubywand@swbell.net>]

Jose Carlos Lord Apple writes ...
> 
> I found the problem !!!! I have a Super Serial Card in Slot 2. If I
> take off it, the Apple II 3.5 Card works well. If I put the Super
> Serial Card in any slot, the Apple II 3.5 Card shows the error ...
 ....

     Wonder if problem could be power. 512k is a lot of memory for an Apple
IIe. Do you have some big memory card plugged into Slot 1-7.

     What happens if you leave Super Serial Card plugged in and remove only the
big memory card in Slot 1-7?


     Or, maybe problem is with Super Serial Card.

     What are settings for DIP switches (SW1 and SW2) on your Super Serial
Card?

     How is the jumper block set (does the arrow point UP or DOWN)?


Rubywand