Re: Problem with Apple II 3.5 Disk Controller Card on Apple IIe

[aguilar@onixinformatica.com.br (Jose Carlos Lord Apple)]

I found the problem !!!! I have a Super Serial Card in Slot 2. If I
take off it, the Apple II 3.5 Card works well. If I put the Super
Serial Card in any slot, the Apple II 3.5 Card shows the error ...
Does anybody can help me ?

Thanks

Jose Carlos


"Bill Garber" <willy46pa@comcast.net> wrote in message news:<_dWcnWDyFq_7JYGjXTWc3A@comcast.com>...
> Is your Apple //e enhanced, I believe that card needs the
> enhanced version of the board.
> I will have the chipsets available soon. Let me see if I can
> get them in quicker.
> --
> Bill @ GarberStreet Enterprises
> http://garberstreet.netfirms.com
> 
> 
> "Jose Carlos Lord Apple" <aguilar@onixinformatica.com.br> wrote in message
> f57a920b.0301081415.62ce0050@posting.google.com">news:f57a920b.0301081415.62ce0050@posting.google.com...
> > Hi,
> >
> > I bougth an Apple II 3.5 Disk Controller Card, new in Box, and a Apple
> > 3.5 Driver (800Kb). Well, my Apple IIe has 512Kb and I put the card on
> > slot 5, or slot 7, and when I will boot, from a floppy disk with
> > ProDOS 8 V2.0.3 (06-May-93), the Apple IIe shows the ProDOS start
> > screen, but stop and enter in monitor mode with:
> >
> > 0002 - A=00 X=06 Y=FE P=36 S=58
> > *
> >
> > If I boot with the Apple Install Disk, with the card on Slot 7, the
> > same error appear !!!
> >
> > I know that the Apple 3.5 Driver is working, because I use it with my
> > Laser 128.
> >
> > Does anybody can help me ? Is this card works with Apple IIe ?
> >
> > Sorry by my terrible English.
> > Jose Carlos
> > BRAZIL